FOXO4-DRI (D-Retro-Inverso)
FOXO4-DRI (D-Retro-Inverso)
FOXO4-DRI is a synthetic 46-residue peptide built entirely from D-amino acids, also written FOXO4 D-retro-inverso peptide. This vial contains 10 mg of lyophilized FOXO4-DRI, supplied as a reference material for in vitro laboratory research.
Intended for use by qualified researchers in controlled laboratory settings, for example as a reference standard in analytical method development, LC-MS identity work and in vitro assays.
Chemical identity
| Name | FOXO4-DRI |
|---|---|
| Synonyms | FOXO4 D-retro-inverso peptide; FOXO4 DRI. Often misspelled “FOX04-DRI” with a zero; the correct name uses the letter O. |
| Sequence (one-letter, all D-form) | LTLRKEPASEIAQSILEAYSQNGWANRRSGGKRPPPRRRQRRKKRG |
| Length | 46 amino acids, free N-terminus and free C-terminus |
| Residue composition | Arg 10, Lys 4, Pro 4, Ala 4, Ser 4, Gly 4, Leu 3, Glu 3, Gln 3, Ile 2, Asn 2, Thr 1, Tyr 1, Trp 1 |
| CAS number | 2460055-10-9 |
| Molecular formula | C228H388N86O64 |
| Average molecular weight | 5358.06 g/mol |
| Monoisotopic mass | 5354.98 Da |
Product specifications
| Form | Lyophilized powder |
|---|---|
| Vial size | 10 mg per vial (nominal fill; net peptide content depends on salt form and counterion) |
| Storage (lyophilized) | −20 °C in the closed vial, sealed and protected from moisture and light |
| Intended use | In vitro laboratory research only |
Structural notes
Every chiral residue in FOXO4-DRI is a D-amino acid; glycine has no chiral centre. “Retro-inverso” describes a design in which a parent sequence is reversed and built from D-amino acids. The peptide is strongly basic, with ten arginine and four lysine residues against three glutamic acids. It has no cysteine, so there are no disulfide bonds, and no methionine, histidine or phenylalanine. It contains one tryptophan and one tyrosine, so it absorbs light near 280 nm.
Analytical identification
Expected masses for identity checks by LC-MS: 5358.06 Da average, 5354.98 Da monoisotopic. Multiply charged ions are expected for a peptide of this size, for example near m/z 1072.00 (five charges), 893.50 (six charges) and 766.00 (seven charges). A D-amino-acid peptide has the same mass as its L-amino-acid counterpart, so mass spectrometry alone does not confirm chirality. The mass shifts if the material is supplied as a salt. Researchers should verify identity and purity of each lot with their own RP-HPLC and mass-spectrometry methods. This page does not state a purity figure.
Handling and storage
Keep the lyophilized powder at −20 °C in the original closed vial, sealed and protected from light and moisture. Allow the vial to reach room temperature before opening to limit condensation. Avoid repeated freeze–thaw cycles of any prepared solution, and follow your laboratory’s own procedures.
Research use only
For laboratory research use only. Not for human or veterinary use. Not a drug, food, dietary supplement or cosmetic, and not intended for diagnostic or therapeutic use. Not an FDA-approved drug product. No dosing, reconstitution or usage information for people or animals is provided. Buyers must be qualified researchers and are responsible for compliance with all applicable laws.
Frequently asked questions
What is FOXO4-DRI?
FOXO4-DRI is a synthetic 46-residue peptide made entirely of D-amino acids. This product is a research material for in vitro laboratory work.
Is it FOXO4-DRI or FOX04-DRI?
FOXO4-DRI, with the letter O. “FOX04-DRI” with a zero is a common misspelling of the same name.
What does DRI mean?
DRI stands for D-retro-inverso: a parent sequence written in reverse order and built from D-amino acids instead of L-amino acids.
What is the amino acid sequence of FOXO4-DRI?
LTLRKEPASEIAQSILEAYSQNGWANRRSGGKRPPPRRRQRRKKRG, 46 residues, all in the D-form, with a free N-terminus and a free C-terminus.
What are the CAS number and molecular weight of FOXO4-DRI?
CAS 2460055-10-9, molecular formula C228H388N86O64, average molecular weight 5358.06 g/mol (monoisotopic 5354.98 Da).
How should FOXO4-DRI be stored?
At −20 °C in the closed vial, away from light and moisture, and let it reach room temperature before opening.
Do you provide dosing or reconstitution instructions?
No. This product is sold for in vitro laboratory research only, and no dosing, reconstitution or usage instructions are provided.
Is this an approved drug?
No. This product is a research material. It is not an FDA-approved drug, it has not been evaluated by the FDA for any use, and it is sold for in vitro research only.
Can this product be used in people or animals?
No. It is for laboratory research use only and is not for human or veterinary use.
Research Use Disclaimer
Legal Notice
Products provided by Peptide Biogenix are intended exclusively for laboratory research and scientific development. They are not approved for human or veterinary use.
Purchaser Responsibility
By placing an order, you acknowledge responsibility for the lawful handling, storage, and use of all research materials in accordance with applicable regulations.
